Detail process to handle iPhone 6P LCD no display CPU issue

Aim to fix every repaired phone.

The customer delivered his iphone 6p to us, Attached the file describes:  LCD Screen has no display and no light while booting. We checked it after we disassembly it , then we found the motherboard was repaired before. We have to take 4 steps to fix it. Following the steps:

1. Measure the working condition of iPhone LCD display IC, all is normal. Then measure the display socket J2019 with Fluke 15B+ Digital Multimeter, we found the #3 pin is short circuit. 90_AP_TO_LCM_MIPI_DATA3_N MIPI image transfer data bus leads directly to CPU, the initial diagnosis is that the CPU is continuous tin or internal damage. As shown in Picture 11-9-1

2. Remove iPhone CPU and then measure this signal line, we found it is the earthing short circuit, which is CPU internal damage, the kit is damaged. 6P and 6 are not the same size; the circuit design is also not the same. By analyzing the WUXINJI schematic diagram, we found the solution.As shown in Picture 11-9-2 and picture 11-9-3

 

3. According to the comparison of WUXINJI schematic diagram, we found that iPhone 6 Plus has one more a set of MIPI image transfer data bus than iPhone 6, 90_AP_TO_LCM_MIPI_DATA3_P、90_AP_TO_LCM_MIPI_DATA3_N, and iPhone 6 doesn't have that line. Because the iPhone 6 only needs to display 4.7 inch images, but iPhone 6 Plus needs to display 5.5 inch images.

4. The faulty iPhone 6 Plus is 90_AP_TO_LCM_MIPI_DATA3_N short circuit, we decided to abandon the 5.5 and install the 4.7 directly. Move the CPU on this fault board to iPhone 6 motherboard, the iPhone LCD can display now！