How to deal iPhone 6 no display failure

Got the iPhone 6, according to the attached file, we know there happens some faults on display screen, but there no any broken, we need to diagnostic the inside.

Another words, we need to measure it. Getting the value, we found the display socket 12 pin doesn't have resistance value. Check if the connected c2001 capacitance and fl2034 inductance have corrosion and virtual solder problems, the fl2034 inductance measured are no resistance value.

The fl2034 inductance passes through the U2403 6 pin tube and then to the CPU. Using a digital multimeter to measure the iPhone touch screen control IC U2403 of the corresponding bottom pins, the data tested are normal. So, we can eliminate the CPU problem. In this case, we need to solder jump wire.

Use QUICK 861DW hot air rework station to remove the cover, and then solder a jumper wire from the 6th pin of u2403 to a measuring point next to the screw hole，and then solidify it with green UV oil.

Install the iPhone and test it, the failure has been solved.

Of course, if you have some other more good ideas,  leave a comment on this article, we will be glad to hear different voice.